Ibanez PHMINI PHASER

$119.99
  • Pedal Type: 100% Pure Analog Phaser

  • Controls: Depth, Feedback, and Speed Knobs; Side-Mounted 4-Stage / 6-Stage Toggle Switch

  • Bypass Layout: True Bypass Switching

  • Power Requirements: External DC 9 Volt AC Adapter Only (Center-Negative)

  • Current Draw: 5 mA @ 9V

  • Dimensions: 2.00” W x 3.65” L x 2.17” H (50.9 mm W x 92.6 mm L x 55.1 mm H)

Pure Analog Phasing and Multi-Stage Circuit Architecture

Handcrafted Japanese Component Optimization

The Ibanez PHMINI Phaser delivers smooth, organic fluid sweeps and rotary speaker emulations within a roadworthy, ultra-compact miniature housing crafted entirely in Japan. Stepping completely away from thin digital algorithms and computerized code approximations, this high-performance modulation pedal features a 100% pure analog circuit pathway. The component arrangement is highly engineered to preserve the exact frequency layout, touch-sensitivity, and raw dynamic response of your instrument. It safeguards the clarity of your core dry signal even when the phase intensity controls are pushed to their maximum parameters.

Switchable Voice Stages and Streamlined Interfacing

Overcoming the structural limitations of typical single-voicing phase shifters, this micro-enclosure incorporates a discrete, side-mounted Stage selection mini-toggle switch. Flicking the control into the 4-Stage position delivers a classic, warm, and highly musical vintage phase shift optimized for traditional classic rock and blues chord structures. Flipping the selector down to the 6-Stage setting introduces an enhanced, dramatic frequency sweep that adds a deep, intense swirl to modern or experimental arrangements. The face of the enclosure structures a large master Speed knob alongside minor Depth and Feedback trimmer pots to ensure easy operation while preventing accidental stage movement.

Creative Rig Integration and Circuit Optimization

High-Saturation Pre-Drive Swirl

Placing the analog phaser directly ahead of your overdrive or high-gain distortion pedal lines unlocks a screaming classic rock lead texture reminiscent of vintage stadium setups. Setting the pedal to 4-Stage mode with a moderate Speed parameters adds a fat, harmonic chewing sound to your picking attack, filtering harsh transients while allowing solos and single-note lines to push to the front of a multi-layered band track.

Deep Spatial Low-End Resonant Whooshes

Flipping the side switch over to 6-Stage mode while maximizing both the Depth and Feedback trimmer pots creates an immersive, deeply saturated sweep optimized for heavy rhythm tracking, clean ambient arpeggios, or electric bass guitar layouts. The all-analog architecture prevents the low-frequency drop-outs common to digital processing, allowing heavy low-end strings to retain absolute punch, weight, and rhythmic structure during slow, dramatic sweeps.

POWER SUPPLY VIA EXTERNAL DC 9 VOLT AC ADAPTER ONLY (CENTER-NEGATIVE). REQUIRED CURRENT CONSUMPTION IS 5mA AT 9V. THIS UNIT DOES NOT SUPPORT INTERNAL BATTERY OPERATION. PLEASE NOTE THAT REQUIRING NON-FACTORY HARDWARE MODIFICATIONS OR USING AN INCORRECT POWER SUPPLY WILL VOID YOUR WARRANTY AND RISK PERMANENT ELECTRICAL COMPONENT DAMAGE.

  • Pedal Type: 100% Pure Analog Phaser

  • Controls: Depth, Feedback, and Speed Knobs; Side-Mounted 4-Stage / 6-Stage Toggle Switch

  • Bypass Layout: True Bypass Switching

  • Power Requirements: External DC 9 Volt AC Adapter Only (Center-Negative)

  • Current Draw: 5 mA @ 9V

  • Dimensions: 2.00” W x 3.65” L x 2.17” H (50.9 mm W x 92.6 mm L x 55.1 mm H)

Pure Analog Phasing and Multi-Stage Circuit Architecture

Handcrafted Japanese Component Optimization

The Ibanez PHMINI Phaser delivers smooth, organic fluid sweeps and rotary speaker emulations within a roadworthy, ultra-compact miniature housing crafted entirely in Japan. Stepping completely away from thin digital algorithms and computerized code approximations, this high-performance modulation pedal features a 100% pure analog circuit pathway. The component arrangement is highly engineered to preserve the exact frequency layout, touch-sensitivity, and raw dynamic response of your instrument. It safeguards the clarity of your core dry signal even when the phase intensity controls are pushed to their maximum parameters.

Switchable Voice Stages and Streamlined Interfacing

Overcoming the structural limitations of typical single-voicing phase shifters, this micro-enclosure incorporates a discrete, side-mounted Stage selection mini-toggle switch. Flicking the control into the 4-Stage position delivers a classic, warm, and highly musical vintage phase shift optimized for traditional classic rock and blues chord structures. Flipping the selector down to the 6-Stage setting introduces an enhanced, dramatic frequency sweep that adds a deep, intense swirl to modern or experimental arrangements. The face of the enclosure structures a large master Speed knob alongside minor Depth and Feedback trimmer pots to ensure easy operation while preventing accidental stage movement.

Creative Rig Integration and Circuit Optimization

High-Saturation Pre-Drive Swirl

Placing the analog phaser directly ahead of your overdrive or high-gain distortion pedal lines unlocks a screaming classic rock lead texture reminiscent of vintage stadium setups. Setting the pedal to 4-Stage mode with a moderate Speed parameters adds a fat, harmonic chewing sound to your picking attack, filtering harsh transients while allowing solos and single-note lines to push to the front of a multi-layered band track.

Deep Spatial Low-End Resonant Whooshes

Flipping the side switch over to 6-Stage mode while maximizing both the Depth and Feedback trimmer pots creates an immersive, deeply saturated sweep optimized for heavy rhythm tracking, clean ambient arpeggios, or electric bass guitar layouts. The all-analog architecture prevents the low-frequency drop-outs common to digital processing, allowing heavy low-end strings to retain absolute punch, weight, and rhythmic structure during slow, dramatic sweeps.

POWER SUPPLY VIA EXTERNAL DC 9 VOLT AC ADAPTER ONLY (CENTER-NEGATIVE). REQUIRED CURRENT CONSUMPTION IS 5mA AT 9V. THIS UNIT DOES NOT SUPPORT INTERNAL BATTERY OPERATION. PLEASE NOTE THAT REQUIRING NON-FACTORY HARDWARE MODIFICATIONS OR USING AN INCORRECT POWER SUPPLY WILL VOID YOUR WARRANTY AND RISK PERMANENT ELECTRICAL COMPONENT DAMAGE.